MC-reservdelar & Tillbehör
Motorcykelreservdelar, bromsklossar, oljefilter, kedjor och övriga MC-tillbehör.
23960 erbjudanden
Highsider Little Number1 LED Taillight With Number Plate Illumination 255-141
Highsider Little number1 LED taillight with license plate light, E-approved, with license plate light.Powerful LED taillight with license plate light, glass color selectable.The best is saved for last – Highsider’s taillight and taillight/turn signal series give you the safety you need and the look you want – whether cruiser, scooter or speedster.Dimensions:Width: 81mmHeight: 23 mmDepth: 29 mmHole spacing between M4 mounting screws:52 mm (center-center).Connections:Green cable = ground (-)Yellow cable= taillight (+)Blue cable = brake light (+)Scope of supply: 1 piece Tinted 690 89 138 108 46 Black Smoked E-Mark LED ABS by unit Rear
Highsider Reflector M5 - 132x13mm 259-123
Highsider ReflectorsSlim Reflector in red with M5 threaded bolt for mounting, E-approved.Dimensions:Width: 135 mmHeight: 15.5 mmDepth: 8.5 mmThreaded bolt M5 x L. 10 mmReflector surface:Width: 131 mmHeight: 12.5 mm 680 20 170 100 40 Red Red E-Mark ABS by unit Rear
Highsider LED Taillight Flight, Black, Red Glass 255-112
Highsider Flight LED taillight, black anodized, E-tested.This slim taillight captivates with its special lines and a sporty design. It has 2 light modules with 4 powerful SMDs each. These are embedded in a high-quality, CNC-milled aluminium housing.The rear light must be mounted vertically in a suitable position, e.g. on a fender. Suspended mounting (overhead) is not permitted. The angle of the handle can be adjusted by up to 30 degrees by loosening the M3 square socket screw.Modern LEDs in SMD construction provide excellent luminosity and make the FLIGHT taillight a real eye-catcher!Dimensions :Width: 61 mmHeight: 14 mmDepth: 32 mmConnections:Yellow = Driving light (+)Red = Brake light (+)Black = Mass (-)Design glass can be ordered in red or tinted.Scope of supply: 1 piece Red 571 76 136 105 40 Black Red E-Mark LED Aluminium by unit Rear
Highsider Ultimate LED Headlight With Wave Holder 223-085
Highsider ULTIMATE LED headlight with Highsider Wave holder, black, side mountConnected to the Highsider Wave bracket, this LED headlight set consists of a high beam and low beam headlight with position light.On the back of the aluminum housing are cooling fins. The clear, simple design of the headlight set is suitable for streetfighters, cruisers and naked bikes.Dimensions:Width 152 mmDepth 98 mmHeight: 121 mmDistance of mounting holes (center – end): 62 mmFixing: Mounting holes on the side with Ø M 10Connections:Black cable (2x) = ground (-)Yellow cable = high beam (+)Blue cable = low beam (+)White cable = position light (+) 8713 1756 170 250 205 Black Translucent E-Mark LED Aluminium by unit Front
Highsider Enterprise CNC LED Indicator 204-1904
Highsider CNC Enterprise-EP1 LED Indicator , E-approved. For front and rear use.Thanks to the elaborately CNC-milled surface, the ENTERPRISE-EP1 has a very futuristic appearance, reflecting many details in its round form for the viewer.That makes the Highsider ENTERPRISE-EP1 a real eye-catcher.In the right direction with the innovative flasher series from Highsider you show not only where you want to go, but also who you are. This is trend-setting design at its best.Dimensions:A Diameter: 30 mmB Width: 48 mmD Depth: 34 mmStalk length: 20 mmThreaded bolt: M8 x 1.25, length 17 mmPower consumption:For 12 V, 0.16 A, 1.92 WConnections:Yellow = flasher (+)Black = Ground (-)Scope of delivery: 1 pair Gold 672 112 160 105 40 Gold Smoked E-Mark LED Aluminium by pair Front/rear
Highsider Enterprise CNC LED Indicator 204-1902
Highsider CNC Enterprise-EP1 LED Indicator , E-approved. For front and rear use.Thanks to the elaborately CNC-milled surface, the ENTERPRISE-EP1 has a very futuristic appearance, reflecting many details in its round form for the viewer.That makes the Highsider ENTERPRISE-EP1 a real eye-catcher.In the right direction with the innovative flasher series from Highsider you show not only where you want to go, but also who you are. This is trend-setting design at its best.Dimensions:A Diameter: 30 mmB Width: 48 mmD Depth: 34 mmStalk length: 20 mmThreaded bolt: M8 x 1.25, length 17 mmPower consumption:For 12 V, 0.16 A, 1.92 WConnections:Yellow = flasher (+)Black = Ground (-)Scope of delivery: 1 pair Red 672 107 160 105 40 Red Smoked E-Mark LED Aluminium by pair Front/rear
Highsider Enterprise CNC LED Indicator 204-1901
Highsider CNC Enterprise-EP1 LED Indicator , E-approved. For front and rear use.Thanks to the elaborately CNC-milled surface, the ENTERPRISE-EP1 has a very futuristic appearance, reflecting many details in its round form for the viewer.That makes the Highsider ENTERPRISE-EP1 a real eye-catcher.In the right direction with the innovative flasher series from Highsider you show not only where you want to go, but also who you are. This is trend-setting design at its best.Dimensions:A Diameter: 30 mmB Width: 48 mmD Depth: 34 mmStalk length: 20 mmThreaded bolt: M8 x 1.25, length 17 mmPower consumption:For 12 V, 0.16 A, 1.92 WConnections:Yellow = flasher (+)Black = Ground (-)Scope of delivery: 1 pair Silver 672 112 160 105 40 Silver Smoked E-Mark LED Aluminium by pair Front/rear
Highsider 7" LED Headlight LTD Typ 8 With TFL, Bend Lighting 223-237
Highsider LTD Type 8 LED Headlight, 7 inch E-Approved– See and be seen! – Of paramount importance to motorcyclists.The installed LED daytime running light with position light in TYPE 8 is the perfect way to improve visibility during the day. The correct daytime running light switching on the vehicle is given without additional control boxes or switches, fulfils the regulations and simplifies the installation.The Highsider LED headlight with cornering light, offers clear advantages over a conventional headlight. The static cornering light activates an additional light when the motorcycle is tilted in a bend. Due to the improved illumination you can see more of the curve and what is behind it. The driver can better adapt to the conditions and situations and is safer on the road. Two ellipsoid lenses in combination with powerful LEDs turn night into day and thus combine a strong plus in safety with a polarizing unique look. To switch from daytime running light to low beam:Press the high beam/light flasher button briefly (approx. 1 second) and release the button as soon as the low beam is active. Then the low beam is permanently active.Dimensions:Diameter: 200 mmDepth: 120 mmDistance mounting holes – housing end: approx. 75 mmHeadlight insert Ø: 178 mmFixing:Side M8 x 1.25Connections:Power input: 3 pin connectorRed cable = low beam (+)White cable = high beam (+)Black cable = ground (-)Separate cable (round connector):Red cable = LED position light (+)Scope of delivery: 1 pieceNote: The resistor included in the scope of delivery is designed for the R nineT (2014), but may also be suitable for other vehicle models.Through this resistor the parking light error message is prevented. Black 11030 1783 240 223 206 Black Translucent 200 E-Mark LED Steel by unit Front
Highsider Apollo Classic LED Indicator 204-177
Power LED turn signal in a black aluminium housing with tinted glass. E-approved for front and rear. In this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, which allow an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board).Thanks to the new LED chip embedding for high-power LEDs, a very high luminance can be achieved with currently the best possible efficiency and service life. This also allows higher light values to be achieved than with conventional LEDs.Dimensions:A Diameter: 22 mmB Width: 39 mmC Depth: 21.5 mmStem length: 16 mmM8 x 1.25 threaded boltConnections:Black cable = ground (-)Yellow cable = turn signal (+)Scope of delivery: 1 pairAdditional accessories from the CLASSIC seriesYour bike – your project: turn your classic into an aesthetic style icon with the CLASSIC series! Inspired by the classic round shapes of the 1960s and 1970s, we’ve created a completely new design that gives your bike character. Chrome 567 196 135 105 40 Chrome Smoked E-Mark LED Aluminium by pair Front/rear
Highsider Apollo Classic LED Indicator 204-176
Power LED turn signal in a black aluminium housing with tinted glass. E-approved for front and rear. In this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, which allow an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board).Thanks to the new LED chip embedding for high-power LEDs, a very high luminance can be achieved with currently the best possible efficiency and service life. This also allows higher light values to be achieved than with conventional LEDs.Dimensions:A Diameter: 22 mmB Width: 39 mmC Depth: 21.5 mmStem length: 16 mmM8 x 1.25 threaded boltConnections:Black cable = ground (-)Yellow cable = turn signal (+)Scope of delivery: 1 pairAdditional accessories from the CLASSIC seriesYour bike – your project: turn your classic into an aesthetic style icon with the CLASSIC series! Inspired by the classic round shapes of the 1960s and 1970s, we’ve created a completely new design that gives your bike character. Black 672 42 160 105 40 Black Smoked E-Mark LED Aluminium by pair Front/rear
Highsider CNC Indicator Holder 220-216
Highsider CNC aluminium indicator holder.Aluminium holder, suitable for indicators with an M8 threaded bolt.Precisely matched the extensive accessories from Highsider is perfectly tailored to your motorcycle. With a maximum of quality and functionality you can easily design your bike according to your wishes.Scope of supply: 1 pair Chrome 680 83 141 109 44 Chrome Aluminium by pair Front/rear
Highsider CNC Indicator Holder 220-215
Highsider CNC aluminium indicator holder.Aluminium holder, suitable for indicators with an M8 threaded bolt.Precisely matched the extensive accessories from Highsider is perfectly tailored to your motorcycle. With a maximum of quality and functionality you can easily design your bike according to your wishes.Scope of supply: 1 pair Black 680 81 141 109 44 Black Aluminium by pair Front/rear
Highsider Split-S SMD License Plate Light 256-066
Highsider SPLIT-S SMD license plate light, E-approved - Edgy design with the latest lighting technology - The small but design beautiful license plate light Highsider SPLIT-S is a must on your bike. The shapely pearl blasted black housing gives your bike that certain something. The license plate light is universally applicable. The very small and very bright number plate lighting is a must for every rebuilder.Dimensions:Height: 10 mmDepth: 22 mmConnections: White = PlusBlack = MassScope of delivery: 1 piece 218 30 145 100 15 Black Translucent E-Mark LED Aluminium by unit Rear
Highsider Aluminium Housing For Colorado LED Unit 254-205G
Highsider Round shape housing made in aluminium for Colorado LED indicators and rear lightsDimensions: Diameter, outside: 43 mmDiameter, inside: 40 mmHeight, total: 14 mmThickness of base plate: approx. 3 mmScope of supply: 1 pair including 4 x threaded bolts and 4 x adhesive tapes. 582 481 137 107 40 Black 43 LED Aluminium by pair Rear
Highsider CNC Head Light Holder Bottom Typ1 220-220
Highsider Bottom Type 1 aluminium headlight holderCNC-milled holder made of aluminium for mounting headlights with lower mounting.Bore for fixing the headlight max. M 10. Suitable for forks with a width of 180 mm to 220 mm (measured from the centre of the fork standpipe to the centre of the fork standpipe).The exact width is adjusted by changing the mounting angle on the bracket using the additional standpipe clamps required.Dimensions of the holder:Overall width: 217 mmWidth: 200 mm (from attachment to attachment)Depth: 37 mmHeight: 15 mmScope of supply: 1 pieceNote: You will also need the standpipe clamps specially manufactured by Highsider (each supplied as a pair) for the following standpipe diameters:1108711002 (207-403) = 35 mm - 37 mm1108711004 (207-405) = 38 mm - 41 mm1108711006 (207-409) = 42 mm - 43 mm1108711008 (207-419) = 50 mm, 52 mm, 54 mm Black 1010 340 280 225 16 Black Aluminium Front
Highsider CB1 DRL Control Box - Switching Daytime Running Light 208-108
Daytime running light control box for vehicles without light switchBy installing the DRL CONTROL- BOX CB1 is the correct circuit between daytime running light and the front lighting on the vehicle given. According to the regulations, the daytime running lights must be connected in such a way that they switch off automatically when the main headlights are switched on. Since the main headlight is always on in vehicles without a light switch, the daytime running light function would not be usable correctly.The BOX is suitable for LED and conventional headlights and is installed between the main headlight with integrated or separate daytime running light and the vehicle's electrical system. The function of the parking light that is switched via the ignition lock when the vehicle is parked is fully functional.DimensionsLength: 48 mmWidth: 28 mmHeight: 14 mmEmployment:IN (vehicle electrics):Yellow = high beam (+)Blue = low beam (+) ON / OFF switch betweenWhite = parking lights (+)Red = ignition 15 (+)Black = ground (-)OUT (headlights)Yellow = high beam (+)Blue = low beam (+)Black = ground (-)To the daytime running lights:White = parking light (+)Red = daytime running light (+)Optional accessories:Light switch On/OffNOTE:A separate ON and OFF switch for the DRL CONTROL-BOX is also required (not included). The rear tail light must always remain switched on, i.e. set to ignition plus. 280 34 140 100 20
Highsider 7" LED Head Light Insert Type8 226-002
Highsider LED main headlight insert TYPE 8, with daytime running, position and cornering light, round, E-Approved.– See and be seen! – Of paramount importance to motorcyclists.The installed LED daytime running light with position light in TYPE 8 is the perfect way to improve visibility during the day. The correct daytime running light switching on the vehicle is given without additional control boxes or switches, fulfils the regulations and simplifies the installation.The Highsider LED headlight with cornering light, offers clear advantages over a conventional headlight. The static cornering light activates an additional light when the motorcycle is tilted in a bend. Due to the improved illumination you can see more of the curve and what is behind it. The driver can better adapt to the conditions and situations and is safer on the road. Two ellipsoid lenses in combination with powerful LEDs turn night into day and thus combine a strong plus in safety with a polarizing unique look. To switch from daytime running light to low beam:Press the high beam/light flasher button briefly (approx. 1 second) and release the button as soon as the low beam is active. Then the low beam is permanently active.Dimensions:Diameter A = 177.8 mmDiameter GA = 169 mmDiameter I = 166.5 mmT = 59 mmR = 10 mmTotal depth from glass to cooling fins: 99.10 mmFixing: bottom M8Connections:Power input: 3 pin connector :Red wire = low beam (+)White wire = high beam (+)Black wire = ground (-)Separate wire (round connector):Red cable = LED position light (+)Scope of delivery: 1 pieceNote: The resistor included in the scope of delivery is designed for the R nineT (2014), but may also be suitable for other vehicle models.Through this resistor the parking light error message is prevented. Chrome 5100 791 200 170 150 Chrome Smoked 177 E-Mark LED by unit
Highsider 7" LED Head Light Insert Type8 226-001
Highsider LED main headlight insert TYPE 8, with daytime running, position and cornering light, round, E-Approved.– See and be seen! – Of paramount importance to motorcyclists.The installed LED daytime running light with position light in TYPE 8 is the perfect way to improve visibility during the day. The correct daytime running light switching on the vehicle is given without additional control boxes or switches, fulfils the regulations and simplifies the installation.The Highsider LED headlight with cornering light, offers clear advantages over a conventional headlight. The static cornering light activates an additional light when the motorcycle is tilted in a bend. Due to the improved illumination you can see more of the curve and what is behind it. The driver can better adapt to the conditions and situations and is safer on the road. Two ellipsoid lenses in combination with powerful LEDs turn night into day and thus combine a strong plus in safety with a polarizing unique look. To switch from daytime running light to low beam:Press the high beam/light flasher button briefly (approx. 1 second) and release the button as soon as the low beam is active. Then the low beam is permanently active.Dimensions:Diameter A = 177.8 mmDiameter GA = 169 mmDiameter I = 166.5 mmT = 59 mmR = 10 mmTotal depth from glass to cooling fins: 99.10 mmFixing: bottom M8Connections:Power input: 3 pin connector :Red wire = low beam (+)White wire = high beam (+)Black wire = ground (-)Separate wire (round connector):Red cable = LED position light (+)Scope of delivery: 1 pieceNote: The resistor included in the scope of delivery is designed for the R nineT (2014), but may also be suitable for other vehicle models.Through this resistor the parking light error message is prevented. Black 5100 791 170 200 150 Black Smoked 177 E-Mark LED by unit
Highsider H4 Headlight Insert Gothic 226-195
Highsider Gothic H4 Insert GOTHICclear glass12V 60/55Wparking lightE tested. 2652 508 170 130 120 Translucent E-Mark Bulb by unit Front
Highsider CNC LED 3in1 Tail-, Brake Light, Indicator Little Bronx, Black, Tinted. 254-2860
Highsider LED tail light/brake light/flasher combination Little Bronx with tinted glass, E-approved.– Chic and compact with great luminosity –Uperior in black, noble in gold or decorativein red, no matter which colour you choose, with the Little Bronx you are guaranteed to attract attention thanks to the extremely bright SMD technology. Clear line, clear form: The finely sandblasted,CNC-milled aluminium housings offer you exactly that. This is in the truest sense of the word – DIRECTIONAL – design.Tailor-made for your bike – the extensive range of accessories fromHighsider is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to suit your needs.Dimensions:AWidth: 26 mmC Height: 12 mmD Depth: 15 mmThreads: M8 x 16 mmConnections:Yellow cable = tail light (+)Red cable = stop light (+)Brown cable = turn signal (+)Black cable =Mass (-)Scope of delivery: 1 pair Black 710 80 145 109 45 Black Smoked E-Mark LED Aluminium by pair Front/rear