MC-elektronik
55 erbjudanden
Highsider Flat Type 9 Headlight LED 223-194
Highsider Flat Type 9 Headlight 4 3/4" with parking light ring, E-approvedWith its compact 4 3/4 inch size, the LED headlight FLAT TYPE 9 cuts a fine figure on your bike. Smallbut still robust. Powerful LED technology solidly packed in a steel housing with round shape and flat back. Tested main headlamp with high beam, low beam and parking light function.The dipped beam is at the bottom and the main beam at the top. The LED parking light is ring-shaped and encloses the reflector, forming a ring of light. The FLAT TYPE 9 is optionally available with Fixing points at the bottom or sides and in different colours.Dimensions:Diameter of housing: 138 mmDiameter of insert: 120 mmDepth of housing: 95 mmFastening: Version lateral M8Thread, L:16 mm or variant below M10 screw, L:25 mmWeight: 0,992 kgConnections:Power consumption: 3 Pin connectorRed = high beam (+)White = low beam (+)Green =position light (+)black = mass (-) 5460 1065 205 174 153 Black Translucent 138 E-Mark LED Steel by unit Front
Highsider HD-Style Type 2 LED Headlight - 7" 223-185
Highsider HD-Style Type 2 Headlight LED 7" - lower mountingStylish-innovative power LED floodlight in a puristic design with parking light function and a round, clear glass. The oval, satin-matt black or chrome metal case has a black or chrome-plated asymmetric – right-hand traffic only – insert, E-marked.Dimensions:Housing diameter: 220 mmHeadlight insert diameter: 178 mmDepth: 155 mmDistance of the mounting holes on the holder (middle – middle): 65 mmPower consumption at 12,5 Volt DC:Dispersion light: approx. 1.6 ampere (20 watts), 12 volts 1450 lumenOnly the upper reflector and the middle ellipsoid insert are illuminated.High beam: approx. 1.6 ampere (20 watts), 12 volts 1582 lumenOnly the upper and lower reflectors are illuminated. The middle ellipsoid insert also stops when the headlight flashes.Connections on the reflector in the headlight housingThe following 3 cables end in a combination plug:Black cable = Ground (-)Red cable = High beam (+)Blue cable = Low beam (+)Additional 2 cables for parking light:Black = ground (-),Red = parking light (+)White= connection f. Control indicator (can be used optionally)Scope of supply: 1 piece including mating connector (connecting plug) with 210 mm cable, for H4 halogen bulbs, connections:Green cable = ground (-)Blue cable = high beam (+)White cable = low beam (+) 5984 1950 220 170 160 Black Translucent 220 E-Mark LED Steel by unit Front
Highsider Type3 LED Main Headlamp Insert 226-015
Highsider Type 3 LED Headlight round Insert, high-beam, low-beam and parking light, E-marked.This round, chrome-plated reflector with black or chrome-plated bezel has high beam, low beam and parking light functions and emits an asymmetrical luminous flux – only permitted for right-hand traffic, E-approved.Dimensions:Diameter A = 177 mmDiameter GA = 168 mmDiameter I = 160 mmT = 61 mmR = 10 mmConnections:Black cable = Ground (-)Red cable = Low beam (+), Power consumption: at 12 Volt 18 Watt approx. 1132 Lumen.White cable = high beam (+), power consumption: at 12 Volt 30 Watt approx. 1770 Lumen.Brown cable = parking light (+), power consumption: at 12 Volt 0.7 WattScope of supply: 1 pieceNotes:Application asymmetrical, approved for right-hand traffic only.Complete spotlight Art.-No. 1108616001 (223-146) and 1108615001 (223-148). Black 6048 741 180 160 210 Black Smoked E-Mark LED
Highsider LED Main Head Light Insert Type3, 7" 226-014
Highsider Type 3 LED Headlight round Insert, high-beam, low-beam and parking light, E-marked.This round, chrome-plated reflector with black or chrome-plated bezel has high beam, low beam and parking light functions and emits an asymmetrical luminous flux – only permitted for right-hand traffic, E-approved.Dimensions:Diameter A = 177 mmDiameter GA = 168 mmDiameter I = 160 mmT = 61 mmR = 10 mmConnections:Black cable = Ground (-)Red cable = Low beam (+), Power consumption: at 12 Volt 18 Watt approx. 1132 Lumen.White cable = high beam (+), power consumption: at 12 Volt 30 Watt approx. 1770 Lumen.Brown cable = parking light (+), power consumption: at 12 Volt 0.7 WattScope of supply: 1 pieceNotes:Application asymmetrical, approved for right-hand traffic only.Complete spotlight Art.-No. 1108616001 (223-146) and 1108615001 (223-148). Chrome 3718 741 220 130 130 Black Smoked E-Mark LED
Highsider Ultimate-High LED SpotLight 223-083
Highsider LED spotlights ULTIMATE-HIGH, E-approvedThe LED spotlight has an aluminium housing with cooling fins on the back. For the mounting of the headlamp there are mounting possibilities on the side and belowavailable.Four M4 threads on each side and three additional M4 threads at the bottom. The clear, simple design is suitable for Streetfighter, Cruiser and Naked-Bikes.Dimensions:Width: 137 mmHeight: 55 mmDepth: 58 mmTechnical data:Voltage: 12 VApplication:yellow = high beam (+)black = mass (-) 5616 236 270 160 130 Black Translucent E-Mark LED Aluminium by unit Front
Highsider LED Taillight Gothic 255-095
Highsider Micro-Bullet LED taillight , black metal housing, smoke or red lens, E-mark.Taillight with power LED in a smooth, black aluminum housing and red glass, E-approved.The Highsider taillight and taillight/indicator series are safe to see, giving you the safety you need and the look you want whether cruiser, scooter or speedster.Dimensions:Diameter(C): max. 30 mmDepth(D) with glass: 75 mmScope of supply: 1 pieceNote: Fender mounting by means of M10 hollow screw – lateral mounting by means of extra handle (15 mm), both included. Black 627 117 140 112 40 Black Translucent E-Mark LED ABS by unit Rear
Highsider 5 3/4" Main Headlight Skyline, LED Parking Light Ring 223-022
Headlight Highsider Skyline, 5 3/4 inch with LED parking light ring, metal housing, H4, 12V 60/55 W, lower mounting, E-markedThe innovation for your safety – the SKYLINE model is a conventional headlight equipped with an H4 bulb (12 volt 60 watt / 55 watt) and a Power LED bezel. The whole thing is packed in a high-quality, black or chrome-plated metal housing. The LED technology and the insert used produce a symmetrical, bright light for optimal perception by other road users, E-tested. Special feature: A special sealing rubber was used on the lamp ring, which allows a fine decorative strip to shine on the housing in the dark, E-tested.Our highlights give your bike an unmistakable style! The fancy design and the perfect technology of the Highsider headlight series make it a highlight in any case!Dimensions of headlights:Diameter: approx. 145 mmDepth: 120 mmFixing: bottom with threaded bolt M10 x length 25 mmConnections:Green = GroundWhite cable = Low beamBlue cable = High beamBrown cable = Parking lightScope of supply: 1 piece Black 23940 1191 368 304 214 Black Translucent 145 E-Mark Bulb Steel by unit Front
Highsider LED Taillight Unit Mono 255-015
Highsider LED taillight unit MONO, clear lens, chrome plated or black, dia. 18 mm, E-marked.Taillight with a power LED and clear glass, embedded in a round aluminum housing, E-approved.The Highsider taillight and taillight/indicator series will be seen with certainty to give you the safety you need and the look you want whether cruiser, scooter or speedster.Measures: Diameter: 18 mmHeight: 8 mmAttachment: Threaded bolt M10 x 1.5 mm,length: 13 mm and nylon nut.Power consumption at 12.5 volts:Taillight = 0,02 AmpereBrakelight = 0,13 AmpereConnections:Black cable = Ground (-)Yellow cable= Taillight (+)Red cable = Brakelight (+)Supplied with: 1 piece, housing color selectable.Optionally available: Matching LED indicators: Part No. 1108571001 (203-215) Black 700 72 145 109 44 Black Translucent 18 E-Mark LED Aluminium by unit Rear
Highsider Split-V LED Taillight 255-097
Highsider SPLIT-V LED taillight, E-approvedThe new Highsider SPLIT-V taillight determined by its modern design and its simple mounting to the Highsider license plate holder, where normally the license plate light is mounted. The Highsider SPLIT-V tail light also includes an integrated license plate light that optimally illuminates the license plate. The design is very suitable for modern motorcycles where the tail light is omitted. Highsider SPLIT-V LED tail light comes in a high quality CNC machined aluminum housing. The taillight is attached with two M4 screws included in the delivery. Fits the license plate holder Highsider AKRON-RS PRO and LSL MANTIS-RS PRO.Dimensions:Height: 20 mmWidth: 39 mmLength: 39 mmCable length: 400 mmConnections:Power consumption: 12V 0.8 WWhite = license plate lightBlack = groundRed = brake lightWhite = taillightBlack = groundScope of supply: 1 piece. 370 62 106 105 33 Black Translucent E-Mark LED Aluminium by unit Rear
Highsider Stainless Steel Push Button (M12) 240-081
Highsider buttons made of stainless steel for the operation and control of all instruments.High quality push button, very robust and protected against vibrations and splash water (IP65). The ergonomic pressure point provides feedback during operation.Dimensions:Diameter: 17.5 mmTotal length: 22.7 mmInstallation length: 15.5 mmInstallation diameter: 12 mmTechnical data:Switching capacity: 2A / 36V DCScope of delivery: 1 piece Black 163 10 160 60 17 Black by unit
Highsider Switch Two Buttons 240-070
Highsider fully CNC machined switch with two buttons.Fits 7/8 inch and 1 inch handlebars. Universally applicable for controlling load relays, switching various modes on tachos, etc.Precisely matched the extensive accessories from Highsider is perfectly tailored to your motorcycle. With a maximum of quality and functionality you can easily design your bike according to your wishes.DimensionsWidth: 12 mmDepth: 40 mmButton Ø: 4.5 mmRubber: 75 mm x 0.3 mmInternal hexagon head screws: M3 x 12 mmCable length: 570 mmAssignment:– Button A : green + red(from bottom)– Button B : green + brown– Green = Input signalScope of supply:1 piece of pushbutton1 x rubber2 x screwsinstructions: NOT for currents above 0.05 amperes. At 12 Volt max. 0.6 Watt! 672 50 160 105 40
Highsider Resistor For LED Indicators 207-090
When changing over to LED or halogen indicators, the flashing frequency changes automatically. Only resistors connected in parallel provide a remedy.Technical data of this resistor:12 Watt15 OhmScope of delivery : 1 piece 104 20 130 80 10 Black LED by unit Front/rear
Highsider Fairing Mirror Universal Adapter With Cover - Long (pair) 304-024
Highsider universal adapter, long Black anodised universal adapter with cover made of aluminium for attaching fairing mirrors, e.g. to the fairing. The short version is suitable for fairing mirrors with the part numbers 1108363 , 1108368 , 1108384 , 1108395 and 1108397 . Dimensions: Overall length: 76 mm Width: 18 mm Screw hole spacing: 21 mm - 58 mm Scope of supply: 2 x universal adapter black anodized, length x width: 76 mm x 18 mm 2 x flat head screw M6 hexagon socket (for mounting the handles) 4 x M6x10mm hexagon socket screw stainless steel 4 x M6x15mm hexagon socket screw stainless steel 4 x M6x20mm hexagon socket screw stainless steel 4 x M6x20mm hexagon socket screw stainless steel 4 x M6x25mm hexagon socket screw stainless steel 4 x M6x30mm hexagon socket screw stainless steel 4 x M6 self-locking nut 4 x washer, Diameter: 11.8 x 6 x 1.4 mm 4 x bush, diameter: 9.8 x 6 x 1 mm 4 x bush, diameter: 11 x 6 x 9.7 mm 4 x bush, diameter: 10.5 x 6 x 7 mm 680 256 144 108 44
Highsider Fairing Mirror Universal Adapter With Cover - Short (pair) 304-023
Highsider universal adapter, short Black anodised universal adapter with cover made of aluminium for attaching fairing mirrors, e.g. to the fairing. The short version is suitable for fairing mirrors with the part numbers 1108363 , 1108368 , 1108384 , 1108395 and 1108397 . Dimensions: Overall length: 60 mm Width: 18 mm Screw hole spacing: 20 mm - 42 mm Scope of supply: 2x universal adapter black anodized (L 59,6 x W 18 mm) 2x flat head screw M6 hexagon socket (for mounting the handles) 4x M6 x 10 mm hexagon socket screw stainless steel 4x M6 x 15 mm hexagon socket screw stainless steel 4x M6 x 20 mm hexagon socket screwScrew stainless steel 4x M6 x 25 mm hexagon socket screw stainless steel 4x M6 x 30 mm hexagon socket screw stainless steel 4x M6 self-locking nut 4x washer, Diameter: 11.8 x 6 x 1.4 mm 4x bush, diameter: 9.8 x 6 x 1 mm 4x bush, diameter: 11 x 6 x 9.7 mm 4x bush, diameter 10.5 x 6 x 7 mm 693 208 165 105 40
Highsider Montana Rim Bar End Mirror with LED Indicators (1pc) 301-528
Highsider Montana RIM handlebar end mirror with integrated LED turn signal/position light in mirror arm, E-approvedImprove the tried and tested without changing the character of the mirror. This was the motto of the creative team at Highsider. Discreet, clear – these are the rear view mirrors of the Montana series. As with its predecessor, the mirror is made of high-quality materials that are perfectly finished as usual.The matt black anodised aluminium, finely bead-blasted, emphasises the high-quality look.With 4 easy-to-reach black screws, the direction indicator can be aligned for a wide range of handlebar types in compliance with ECE. Fits modern motorcycles with an inner handlebar diameter of 12-22 mm, i.e. most 7/8 and 1 inch alloy or steel handlebars. Can be used on both the left and right. The handlebar end mirrors with LED turn signals are mounted in pairs.Make sure that the direction indicators are oriented parallel to the vehicle in the direction of travel and forward to the ground so that the illumination is ECE-compliant. Mirrors and indicators are E-approved, there is no entry in the vehicle documents or carry any documents necessary.Dimensions:A/B Ø mirror head: 102 mmC Width : 60 mmD Height : 200 mmConnections:Black cable (-)Yellow cable (+)Cable length: 1000 mmNotes:– Only suitable for hanging installation.– It must always be installed 2 mirrors, because turn signals are integrated. 3237 500 235 168 82 Handlebar Black Intérieur guidon E-Mark Oui Aluminium 102.0 102.0 à l'unité Right/Left Round
Highsider CNC Cover Caps For M10, Black Matt 160-315
The high-quality aluminium caps in rich, trendy matt black or shiny black and brand logo cover the original mirror mount. They protect against corrosion and refine the appearance of the handlebars. A rubber coating is applied to the cylinder for optimum fit. The caps are ideally suited for conversion to bar end mirrors.Dimensions:Diameter: 16 mmDiameter cylinder: 7.8mmDepth: 11 mm1 pair Matte Black 20 7 98 50 4
SP Connect Vent Mount Snap
SP Connect Vent Mount Snap är ett kompakt och smidigt fäste som gör det enkelt att montera din mobil i bilen – perfekt för både vardagskörning och resor. Fästet passar de flesta ventilationsgaller och klickas snabbt fast med SP Connects "snap on"-system. Din mobil sitter säkert, roterbart och alltid inom synhåll.Fördelar:Snabb montering: Klicka enkelt fast din SPC-telefonhållare – inget krångel med klämmor eller sugproppar.Flexibel användning: Fästs direkt på bilens ventilationsgaller och kan roteras 360° för optimal vy och användning.Kompakt och portabel: Tar minimalt med plats och får enkelt plats i fickan – perfekt att ta med till hyrbilen eller flera bilar.Optimal funktionalitet: Din mobil hålls stabilt på plats, vilket gör att du enkelt kan följa GPS:en och använda handsfree-funktioner under körning.Specifikationer:Montering: Passar de flesta ventilationsgaller i bil.Rotation: Fritt roterbar 360° för anpassad visning.Kompatibilitet: För SPC Phone Case (ej SPC+).Design: Liten och lätt att ta med – idealisk för resor.I förpackningen:1 × Vent Mount SnapPerfekt för:Bilförare och resenärer som vill ha ett enkelt, säkert och portabelt mobilfäste som fungerar i både den egna bilen och hyrbilen – alltid med mobilen lätt tillgänglig.
SP Connect Magnetic Ring Mount SPC+
SP Connect Magnetic Ring Mount SPC+ är det smarta lilla tillbehöret som gör din mobil ännu mer mångsidig. Fäst ringen på baksidan av ditt SPC+ Phone Case och få ett praktiskt grepp för selfies, ett stabilt stativ för videosamtal eller en bekväm hållare för att titta på film – allt i ett.Fördelar:Magnetisk montering: Enkel att fästa och ta bort tack vare den smarta magnetlösningen – inga verktyg behövs.360° rotation: Justera vyn precis som du vill – perfekt för både liggande och stående användning.Snabb och smidig: Använd ringen som grepp när du tar bilder eller filmar, och fäll ut den som stöd när du vill ha händerna fria.Lätt och smidig att bära: Den tunna designen gör att den inte stör i fickan eller väskan.Specifikationer:Diameter: 58 mmKompatibilitet: För SPC+ Phone CaseI förpackningen:1 × Magnetic Ring MountPerfekt för:Användare av SP Connect SPC+ som vill ha ett bekvämt och mångsidigt tillbehör för vardag, resor, selfies och handsfree-användning – allt i en kompakt design.
SP Connect Head SPC+ Moto LT
SP Connect Head SPC+ Moto LT gör det möjligt att enkelt uppgradera ditt befintliga Moto Mount LT-fäste till att bli kompatibelt med den nya generationens SP Connect SPC+ Phone Cases. Perfekt för dig som vill fortsätta använda ditt pålitliga fäste – men med den senaste tekniken.Fördelar:SPC+-kompatibilitet: Gör din Moto Mount LT redo för användning med SPC+ Phone Cases.Tunn och lätt design: En diskret uppgradering som inte påverkar fästets profil eller känsla.Stark och säker: Ger ett stabilt och säkert grepp om telefonen – även vid höga hastigheter.Enkel montering: Byt bara ut det gamla fästehuvudet – inga verktyg utöver det nödvändiga krävs.Kompatibilitet:Passar till Moto Mount LT (ej Pro-varianten)I förpackningen:1 × Head SPC+ (för Moto Mount LT)Perfekt för:SP Connect-användare med Moto Mount LT som vill uppgradera till SPC+ utan att byta hela fästet – snabbt, smidigt och framtidssäkert.
