MC-delar
Jämför priser på MC-delar och utrustning — allt för motorcykel samlat på ett ställe. Här hittar du MC-kläder, hjälmar, reservdelar, elektronik och mopeder från ledande svenska och europeiska återförsäljare.
26472 erbjudanden
Underkategorier
Highsider CNC Push Button Classic, Chrome, 7/8 & 1" Handlebars 240-073
Highsider Classic push button, suitable for 7/8" and 1" handlebars.CNC milled switch with two buttons. Can be used universally to control load relays, switch various modes on speedometers, etc.Connections:Button A : green and red (from below).Button B : green and brown Green is input signalDimensions:Button Ø: 4.5 mmRubber: 75 mm x 0.3 mmAllen screws: M3x 5 mmCable length 570 mmScope of delivery:1x push button1x rubber2x screwsNote: NOT FOR CURRENTS over 0.05 amps. So at 12 volts max. 0.6 watts. Chrome 672 500 160 105 40 Chrome by unit
Highsider Stainless Steel Push Button (M12) 240-081
Highsider buttons made of stainless steel for the operation and control of all instruments.High quality push button, very robust and protected against vibrations and splash water (IP65). The ergonomic pressure point provides feedback during operation.Dimensions:Diameter: 17.5 mmTotal length: 22.7 mmInstallation length: 15.5 mmInstallation diameter: 12 mmTechnical data:Switching capacity: 2A / 36V DCScope of delivery: 1 piece Black 163 10 160 60 17 Black by unit
Highsider Switch Two Buttons 240-070
Highsider fully CNC machined switch with two buttons.Fits 7/8 inch and 1 inch handlebars. Universally applicable for controlling load relays, switching various modes on tachos, etc.Precisely matched the extensive accessories from Highsider is perfectly tailored to your motorcycle. With a maximum of quality and functionality you can easily design your bike according to your wishes.DimensionsWidth: 12 mmDepth: 40 mmButton Ø: 4.5 mmRubber: 75 mm x 0.3 mmInternal hexagon head screws: M3 x 12 mmCable length: 570 mmAssignment:– Button A : green + red(from bottom)– Button B : green + brown– Green = Input signalScope of supply:1 piece of pushbutton1 x rubber2 x screwsinstructions: NOT for currents above 0.05 amperes. At 12 Volt max. 0.6 Watt! 672 50 160 105 40
Highsider Indicator Adapter Cable - Harley Davidson 207-083
Adapter cable for connecting accessory flashers with 3.5 mm round plugs to the original wiring harness of your machine.Fits various Harley models.For the easy and fast flasher conversion without soldering or crimping.Avoids removing the socket on the original wiring harness.Therefore, at any time backfitting with the original turn signals. 135 11 100 90 15 par paire
Highsider Resistor For LED Indicators 207-090
When changing over to LED or halogen indicators, the flashing frequency changes automatically. Only resistors connected in parallel provide a remedy.Technical data of this resistor:12 Watt15 OhmScope of delivery : 1 piece 104 20 130 80 10 Black LED by unit Front/rear
Highsider Handlebar Accessories Adapter 161-054
Highsider D17 mounting kit for various Honda motorbikesThis special mounting kit allows the popular Highsider handlebar end weights, *handlebar end mirrors or lever guards to be mounted on the original handlebars of Honda motorbikes.Tailor-made for your bike - the extensive range of accessories from Highsider is perfectly tailored to your motorbike. With the highest level of quality and functionality, you can easily customise your bike according to your wishes.Dimensions:Outer diameter: 17.4 mmInner diameter: 6.2 mmLength: 35 mmScope of delivery: 1 pair 188 50 125 100 15
Highsider Esagano-RS Handlebar End Mirror, Short 301-378
Highsider ESAGANO-RS handlebar end mirror, short, E-approvedRising and flat trapezoids create the futuristic design of the Highsider ESAGANO-RS mirror series, which thus picks up the design language of modern motorcycles. The base body of the mirror head, made of high-quality plastic, encloses the distinctive inlay, which is CNC machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with the rising and flat tapered geometries. The bead-blasted and matte black anodized surface of the aluminum contrasts with the surface of the mirror head, completing the image. The aluminum short handlebar end stem allows the alignment of the mirror head in the appropriate position for your machine via its versatile adjustment range and can be mounted both standing and hanging on the handlebar. The mirror is mounted using the optically matching handlebar weight ESAGANO-LS with 12mm stem mount or a handlebar weight in an alternative design from our product range. If there is sufficient space, the mirror can also be mounted directly on the handlebar using the supplied aluminum adapter rings.Dimensions:A width head: 118 mmB height head: 92 mmC total width: 139 mmD total height: 145 mmScope of supply:1 piece handlebar end mirrorReducing ring 7/8 inchReducing ring 1 inchTip:To close any holes. Holes for mounting the original handlebar mirrors please use the Highsider closure caps. Black / Silver 3102 358 235 165 80 Handlebar Black & Silver Serrage sur guidon E-Mark Non Aluminium & Plastique 92.0 118.0 à l'unité Gauche + Droite Trapezoid
Highsider Esagano-RS Handlebar End Mirror, Short 301-364
Highsider ESAGANO-RS handlebar end mirror, short, E-approvedRising and flat trapezoids create the futuristic design of the Highsider ESAGANO-RS mirror series, which thus picks up the design language of modern motorcycles. The base body of the mirror head, made of high-quality plastic, encloses the distinctive inlay, which is CNC machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with the rising and flat tapered geometries. The bead-blasted and matte black anodized surface of the aluminum contrasts with the surface of the mirror head, completing the image. The aluminum short handlebar end stem allows the alignment of the mirror head in the appropriate position for your machine via its versatile adjustment range and can be mounted both standing and hanging on the handlebar. The mirror is mounted using the optically matching handlebar weight ESAGANO-LS with 12mm stem mount or a handlebar weight in an alternative design from our product range. If there is sufficient space, the mirror can also be mounted directly on the handlebar using the supplied aluminum adapter rings.Dimensions:A width head: 118 mmB height head: 92 mmC total width: 139 mmD total height: 145 mmScope of supply:1 piece handlebar end mirrorReducing ring 7/8 inchReducing ring 1 inchTip:To close any holes. Holes for mounting the original handlebar mirrors please use the Highsider closure caps. Black / Black 3102 378 235 165 80 Handlebar Black Serrage sur guidon E-Mark Non Aluminium & Plastique 92.0 118.0 à l'unité Gauche + Droite Trapezoid
Highsider Esagano-RS Handlebar End Mirror, Long 301-379
Highsider ESAGANO-RS handlebar end mirror, long, E-approvedRising and flat trapezoids create the futuristic design of the Highsider ESAGANO-RS mirror series, which thus picks up the design language of modern motorcycles. The base body of the mirror head, made of high-quality plastic, encloses the distinctive inlay, which is CNC machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with the rising and flat tapered geometries. The bead-blasted and matte black anodized surface of the aluminum contrasts with the surface of the mirror head, completing the image. The long handlebar end stem in aluminum embodies design and function. In this way, the forces acting on the mirror during travel are dissipated particularly effectively via binomial structures using tension and compression points. At the same time, this structure reduces the weight of the mirror stem and also creates a visually harmonious overall appearance. The handlebar end mirror can be mounted both standing and hanging on the handlebar. The mirror is mounted using the optically matching handlebar weight ESAGANO-LS with 12mm stem mount or a handlebar weight in an alternative design from our product range. If there is sufficient space, the mirror can also be attached directly to the handlebars via the supplied aluminum adapter ringsDimensions:A width head: 118 mmB height head: 92 mmC total width: 90 mmD total height: 169 mmScope of delivery:1 piece handlebar end mirror incl.Reducing ring 7/8 inchReducing ring 1 inchTip:To close any holes for mounting the original handlebar mirrors, please use the Highsider sealing caps. Black / Silver 3102 400 235 165 80 Handlebar Black & Silver Serrage sur guidon Non Aluminium & Plastique 92.0 118.0 à l'unité Gauche + Droite Trapezoid
Highsider Esagano-RS Handlebar End Mirror, Long 301-365
Highsider ESAGANO-RS handlebar end mirror, long, E-approvedRising and flat trapezoids create the futuristic design of the Highsider ESAGANO-RS mirror series, which thus picks up the design language of modern motorcycles. The base body of the mirror head, made of high-quality plastic, encloses the distinctive inlay, which is CNC machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with the rising and flat tapered geometries. The bead-blasted and matte black anodized surface of the aluminum contrasts with the surface of the mirror head, completing the image. The long handlebar end stem in aluminum embodies design and function. In this way, the forces acting on the mirror during travel are dissipated particularly effectively via binomial structures using tension and compression points. At the same time, this structure reduces the weight of the mirror stem and also creates a visually harmonious overall appearance. The handlebar end mirror can be mounted both standing and hanging on the handlebar. The mirror is mounted using the optically matching handlebar weight ESAGANO-LS with 12mm stem mount or a handlebar weight in an alternative design from our product range. If there is sufficient space, the mirror can also be attached directly to the handlebars via the supplied aluminum adapter ringsDimensions:A width head: 118 mmB height head: 92 mmC total width: 90 mmD total height: 169 mmScope of delivery:1 piece handlebar end mirror incl.Reducing ring 7/8 inchReducing ring 1 inchTip:To close any holes for mounting the original handlebar mirrors, please use the Highsider sealing caps. Black / Black 3102 400 235 165 80 Handlebar Black Serrage sur guidon Non Aluminium & Plastique 92.0 118.0 à l'unité Gauche + Droite Trapezoid
Highsider Montana XL Mirror (1pc) 301-016XL
Highsider MONTANA-XL mirror, E-approvedThe Highsider MONTANA XL handlebar mirror, impresses with its timeless and classic design with a black anodized surface finish to match the stem. The mirror head here is paired with a 25mm extended mirror arm with new design accents incorporated into the mirror arm. The extended mirror arm thus offers the driver a better view to the rear and increases ergonomics when driving.Dimensions:A/B Ø head: 102 mmC Total width: 165 mmD Total height: 185 mmScope of delivery: 1 piece1x M10x 1.25 right-hand thread adapter1x M10x 1.25 left-hand thread adapter. 2970 470 80 165 225 Handlebar Black Vis E-Mark Non Aluminium 185.0 165.0 à l'unité Gauche + Droite Round M10 x 1.25 Left + Right
Highsider License Plate Holder Akron-RS Pro 280-105HP
Highsider AKRON-RS PRO licence plate holder incl. licence plate lightThe Highsider AKRON-RS PRO licence plate holder adapts perfectly to the lines of your bike thanks to its design.The model-specific holder of the Highsider AKRON-RS PRO enables mounting on the original mounting points of your bike and thus replacement without further drilling or cutting. To prevent damage to cables, all sharp-edged penetrations are protected by a rubber membrane.The licence plate is made of sheet steel and is 2 mm thick. It is precisely cut to size using a laser. After edging, it is given a weather-resistant black powder coating.This ensures an optimum fit and a long service life.The infinitely variable adjustment option allows you to position the plate as required without drilling. To hold the plate in this position, there is an additional locking screw.The indicator brackets of the Highsider AKRON-RS PRO are adjustable in width and therefore suitable for all types of accessory indicators. This adjustment option allows you to adapt the position of your indicators to a wide variety of licence plates. To enable the indicators to be fitted without disconnecting them from the wiring harness, the 8 mm holes are slotted to the side.You can also individually adjust the position of the rear indicator using a slider. Adaptation to the different designs of EU licence plates is therefore no problem.To securely screw the licence plate and reduce vibrations, two rubber washers are included in the scope of delivery. A further rubber buffer supports the licence plate on its underside.This PRO version of the Highsider AKRON-RS includes the very small, high-quality aluminium Highsider licence plate light with mounting plate and support arm. The bracket is adjustable in height and designed so that it can be mounted in the legally prescribed position. Details: • model-specific bracket• infinitely adjustable indicator holder• slotted indicator holder for easy installation without cable separation• infinitely adjustable reflector, E-approved• suitable for European licence plates• infinitely adjustable angle of inclination• additional screw for optimum positional security• simple fixing without further work steps (e.g. drilling)• easy to install without cable separation e.g. drilling)• simple installation of the licence plate using a slotted bracket• licence plate light incl. holder included in the scope of delivery. bracket included• licence plate light, E-marked• infinitely adjustable licence plate light• many different options for mounting the licence plate lightThe scope of delivery of the Highsider AKRON-RS PRO includes: • Model-specific bracket with mounting parts• Highsider AKRON-RS licence plate mounting plate• Adjustable indicator brackets• E-marked reflector with adjustable bracket• E-marked licence plate light• Fitting instructionsNotes: • If side reflectors are fitted to your original licence plate holder, these must be refitted in a suitable position or replaced with new ones. • Special indicator holders are optionally available for the original indicators.Tip:If you have not found a model-specific licence plate holder for your vehicle, then you will certainly find what you are looking for in the universal licence plate holders from Highsider, which are available in many different versions. 9408 793 280 280 120 Black Steel
Highsider License Plate Holder Akron-RS Pro 280-622HP
Highsider AKRON-RS PRO licence plate holder incl. licence plate lightThe Highsider AKRON-RS PRO licence plate holder adapts perfectly to the lines of your bike thanks to its design.The model-specific holder of the Highsider AKRON-RS PRO enables mounting on the original mounting points of your bike and thus replacement without further drilling or cutting. To prevent damage to cables, all sharp-edged penetrations are protected by a rubber membrane.The licence plate is made of sheet steel and is 2 mm thick. It is precisely cut to size using a laser. After edging, it is given a weather-resistant black powder coating.This ensures an optimum fit and a long service life.The infinitely variable adjustment option allows you to position the plate as required without drilling. To hold the plate in this position, there is an additional locking screw.The indicator brackets of the Highsider AKRON-RS PRO are adjustable in width and therefore suitable for all types of accessory indicators. This adjustment option allows you to adapt the position of your indicators to a wide variety of licence plates. To enable the indicators to be fitted without disconnecting them from the wiring harness, the 8 mm holes are slotted to the side.You can also individually adjust the position of the rear indicator using a slider. Adaptation to the different designs of EU licence plates is therefore no problem.To securely screw the licence plate and reduce vibrations, two rubber washers are included in the scope of delivery. A further rubber buffer supports the licence plate on its underside.This PRO version of the Highsider AKRON-RS includes the very small, high-quality aluminium Highsider licence plate light with mounting plate and support arm. The bracket is adjustable in height and designed so that it can be mounted in the legally prescribed position. Details: • model-specific bracket• infinitely adjustable indicator holder• slotted indicator holder for easy installation without cable separation• infinitely adjustable reflector, E-approved• suitable for European licence plates• infinitely adjustable angle of inclination• additional screw for optimum positional security• simple fixing without further work steps (e.g. drilling)• easy to install without cable separation e.g. drilling)• simple installation of the licence plate using a slotted bracket• licence plate light incl. holder included in the scope of delivery. bracket included• licence plate light, E-marked• infinitely adjustable licence plate light• many different options for mounting the licence plate lightThe scope of delivery of the Highsider AKRON-RS PRO includes: • Model-specific bracket with mounting parts• Highsider AKRON-RS licence plate mounting plate• Adjustable indicator brackets• E-marked reflector with adjustable bracket• E-marked licence plate light• Fitting instructionsNotes: • If side reflectors are fitted to your original licence plate holder, these must be refitted in a suitable position or replaced with new ones. • Special indicator holders are optionally available for the original indicators.Tip:If you have not found a model-specific licence plate holder for your vehicle, then you will certainly find what you are looking for in the universal licence plate holders from Highsider, which are available in many different versions. 9408 793 280 280 120 Black Steel
Highsider Montana-Blast XL Mirror (1pc) 301-001XL
Highsider MONTANA-BLAST XL mirror, E-testedThe Highsider MONTANA-BLAST XL handlebar mirror, impresses with its timeless and classic design with a fine bead blasted surface finish to match the stem. The mirror head here is paired with a 25mm extended mirror arm with new design accents incorporated into the mirror arm. The extended mirror arm thus offers the driver a better view to the rear and increases ergonomics when driving.Dimensions:A/B Ø head: 102 mmC Total width: 165 mmD Total height: 185 mmScope of supply: 1 piece- 1x M10x1.25 right-hand thread adapter- 1x M10x1.25 left-hand thread adapter. 2970 470 80 165 225 Handlebar Black Vis E-Mark Non Aluminium 185.0 165.0 à l'unité Gauche + Droite Round M10 x 1.25 Left + Right
Highsider Esagano-RS EVO Handlebar End Mirror 301-383
Highsider ESAGANO-RS EVO handlebar end mirror, E-approvedRising and flat trapezoids create the futuristic design of the Highsider ESAGANO-RS mirror series, which thus picks up on the design language of modern motorbikes. The basic body of the mirror head is made of high-quality plastic and encloses the distinctive inlay, which is CNC-manufactured from aluminium. This symbolises the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The pearl-blasted and matt black anodised surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The long handlebar end stem in aluminium embodies design and function. For example, the forces acting on the mirror during the ride are dissipated particularly effectively via binomial structures through traction and pressure points. At the same time, this structure reduces the weight of the mirror stem and creates a visually harmonious overall appearance. Thanks to our proven EVO mounting system, the installation is plug and play directly on the handlebar. No additional handlebar weight / accessories are needed to mount the mirror on the handlebar! The handlebar end mirror can be mounted either standing or hanging on the handlebar.Dimensions:A Width head: 118 mmB Height of head: 92 mmC Total width: 90 mmD Total height: 164 mmScope of delivery:1 piece handlebar end mirror incl.Reducing ring 7/8 inchReducing ring 1 inchTip:Please use the Highsider sealing caps to close any holes for fastening the original handlebar mirrors. Black / Silver 2970 400 80 165 225 Handlebar Black & Silver Intérieur guidon E-Mark Non Aluminium 92.0 118.0 à l'unité Gauche + Droite Trapezoid
Highsider Esagano-RS EVO Handlebar End Mirror 301-366
Highsider ESAGANO-RS EVO handlebar end mirror, E-approvedRising and flat trapezoids create the futuristic design of the Highsider ESAGANO-RS mirror series, which thus picks up on the design language of modern motorbikes. The basic body of the mirror head is made of high-quality plastic and encloses the distinctive inlay, which is CNC-manufactured from aluminium. This symbolises the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The pearl-blasted and matt black anodised surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The long handlebar end stem in aluminium embodies design and function. For example, the forces acting on the mirror during the ride are dissipated particularly effectively via binomial structures through traction and pressure points. At the same time, this structure reduces the weight of the mirror stem and creates a visually harmonious overall appearance. Thanks to our proven EVO mounting system, the installation is plug and play directly on the handlebar. No additional handlebar weight / accessories are needed to mount the mirror on the handlebar! The handlebar end mirror can be mounted either standing or hanging on the handlebar.Dimensions:A Width head: 118 mmB Height of head: 92 mmC Total width: 90 mmD Total height: 164 mmScope of delivery:1 piece handlebar end mirror incl.Reducing ring 7/8 inchReducing ring 1 inchTip:Please use the Highsider sealing caps to close any holes for fastening the original handlebar mirrors. Black / Black 2970 400 80 165 225 Handlebar Black Intérieur guidon E-Mark Non Aluminium & Plastique 92.0 118.0 à l'unité Gauche + Droite Trapezoid
Highsider Esagano-RS Handlebar Mirror (Pair) 301-369
Highsider ESAGANO-RS mirror, E-approvedRising and flat trapezoids create the futuristic design of the Highsider ESAGANO-RS mirror series, which thus picks up the design language of modern motorcycles. The base body of the mirror head, made of high-quality plastic, encloses the distinctive inlay, which is CNC machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with the rising and flat tapered geometries. The bead blasted and matte black anodized surface of the aluminum contrasts with the surface of the mirror head, completing the image. The stem, in aluminum, allows, through its cranking and size, a wide exhibition of the mirror head, which allows a particularly good rear view. At the same time, thanks to its design, it offers enough space between the handle area and mirror stem.Dimensions:Width head: 117 mmHeight head: 92 mmTotal width: 241 mmTotal height: 159 mmWrench size RH/LH adapter: 16 mmScope of supply:1 pair of mirrors, incl.2 x adapter M10 x 1.25 mm right-hand thread1 x adapter M10 x 1.25 mm left-hand thread Black / Silver 4185 864 310 225 60 Black & Silver Trous Non Aluminium & Plastique 92.0 117.0 par paire Gauche + Droite Trapezoid M10 x 1.25 Left + Right
Highsider Esagano-RS Handlebar Mirror (Pair) 301-363
Highsider ESAGANO-RS mirror, E-approvedRising and flat trapezoids create the futuristic design of the Highsider ESAGANO-RS mirror series, which thus picks up the design language of modern motorcycles. The base body of the mirror head, made of high-quality plastic, encloses the distinctive inlay, which is CNC machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with the rising and flat tapered geometries. The bead blasted and matte black anodized surface of the aluminum contrasts with the surface of the mirror head, completing the image. The stem, in aluminum, allows, through its cranking and size, a wide exhibition of the mirror head, which allows a particularly good rear view. At the same time, thanks to its design, it offers enough space between the handle area and mirror stem.Dimensions:Width head: 117 mmHeight head: 92 mmTotal width: 241 mmTotal height: 159 mmWrench size RH/LH adapter: 16 mmScope of supply:1 pair of mirrors, incl.2 x adapter M10 x 1.25 mm right-hand thread1 x adapter M10 x 1.25 mm left-hand thread Black / Black 4185 864 310 225 60 Black Trous Non Aluminium & Plastique 92.0 117.0 par paire Gauche + Droite Trapezoid M10 x 1.25 Left + Right
Highsider Ferrara 2 Handlebar End Mirror, Short (1pc) 301-785
Highsider FERRARA 2 handlebar end mirror, short, E-approved.Stylish handlebar end mirror in a sporty design with an aluminium head. A corrosion-resistant stainless steel ball clamp allows precise adjustment of the mirror. The design of the mirror stem is adapted to the series and retains its proven adjustment functions. The aluminium clamp is clamped directly to the 1 inch or 7/8 inch steering tube. It can also be clamped to a suitable handlebar weight. The mirror can be mounted on the right and left as well as standing up or hanging down.Prudence with style - whether classic or modern. The Highsider mirror series are characterised by their striking design and aerodynamic function. So you can keep an overview.Dimensions:A Width head: 122 mmB Height head: 85 mm Scope of delivery: 1 piece incl.1x adapter 1 inch1x adapter 7/8 inch 2970 300 80 165 225 Handlebar Black Serrage sur guidon E-Mark Non Aluminium 85.0 122.0 à l'unité Gauche + Droite Trapezoid
Highsider Victory-Blast XL Handlebar Mirror (1pc) 301-124XL
Highsider VICTORY-BLAST XL mirror, E-approvedThe Highsider VICTORY-BLAST XL handlebar mirror, impresses with its timeless and classic design with a fine bead blasted surface finish to match the stem. The mirror head here is paired with a 25mm extended mirror arm with new design accents incorporated into the mirror arm. The extended mirror arm thus offers the driver a better view to the rear and increases ergonomics when driving.Dimensions:A width head: 117 mmB height head: 83 mmC total width: 197 mmD total height: 176 mmScope of supply: 1 piece1x M10x1.25 right-hand thread adapter1x M10x1.25 left-hand thread adapter. 2970 410 80 165 225 Handlebar Black Vis E-Mark Non 176.0 197.0 à l'unité Gauche + Droite Trapezoid M10 x 1.25 Left + Right