MC-delar
Jämför priser på MC-delar och utrustning — allt för motorcykel samlat på ett ställe. Här hittar du MC-kläder, hjälmar, reservdelar, elektronik och mopeder från ledande svenska och europeiska återförsäljare.
26331 erbjudanden
Underkategorier
Highsider Akron-LS Bar Ends 161-0591
– Styling for your bike –With these nobly designed Bar End Weights with handlebar end mirror receptacle, you can design your bike in detail according to your ideas. These end pieces are used for all Highsider & SHIN YO handlebar end mirrors with handlebar outer clamp. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to clamping system with different sleeves universal suitable for 7/8 (Ø22 mm), 1 inch (Ø25,4 mm) or X-Bar (Ø28,6 mm) tube handlebars with an inner diameter from 12 to 22 mm.Our accessories TIP:Excellent in combination with Akron grips. The caps of the handlebar ends mirror the design of the grip rubbers and make your motorcycle cockpit an eye-catcher. If you do want to switch back to handlebar mirrors, you can easily use the optionally available coloured rings instead of a handlebar end mirror and thus add further colour accents. The colour rings are simply pushed over the end of the handlebar and fastened with the grub screw located on the ring.Dimensions:Stem weight Ø: 37,4 mmWidth: 29 mmMount for mirror: Ø 29,90 mm, Width: 12 mmScope of delivery:2 x Bar End Weights.2 x clamping sleeves each with D. 12 mm and D. 16 mm2 x spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm2 x M6 central screws2 x M6 cone nutsNote:For Bar End Weights with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar.Steering ends do not have to be approved, therefore do not require any test marks, certificates or ABEs. Silver 680 243 141 109 44 Silver 37,4 Aluminium by pair
Highsider Akron-LS Bar Ends 161-0590
– Styling for your bike –With these nobly designed Bar End Weights with handlebar end mirror receptacle, you can design your bike in detail according to your ideas. These end pieces are used for all Highsider & SHIN YO handlebar end mirrors with handlebar outer clamp. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to clamping system with different sleeves universal suitable for 7/8 (Ø22 mm), 1 inch (Ø25,4 mm) or X-Bar (Ø28,6 mm) tube handlebars with an inner diameter from 12 to 22 mm.Our accessories TIP:Excellent in combination with Akron grips. The caps of the handlebar ends mirror the design of the grip rubbers and make your motorcycle cockpit an eye-catcher. If you do want to switch back to handlebar mirrors, you can easily use the optionally available coloured rings instead of a handlebar end mirror and thus add further colour accents. The colour rings are simply pushed over the end of the handlebar and fastened with the grub screw located on the ring.Dimensions:Stem weight Ø: 37,4 mmWidth: 29 mmMount for mirror: Ø 29,90 mm, Width: 12 mmScope of delivery:2 x Bar End Weights.2 x clamping sleeves each with D. 12 mm and D. 16 mm2 x spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm2 x M6 central screws2 x M6 cone nutsNote:For Bar End Weights with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar.Steering ends do not have to be approved, therefore do not require any test marks, certificates or ABEs. Black 700 242 145 109 44 Black 37,4 Aluminium by pair
Highsider Fairing Mirror Universal Adapter With Cover - Short (pair) 304-023
Highsider universal adapter, short Black anodised universal adapter with cover made of aluminium for attaching fairing mirrors, e.g. to the fairing. The short version is suitable for fairing mirrors with the part numbers 1108363 , 1108368 , 1108384 , 1108395 and 1108397 . Dimensions: Overall length: 60 mm Width: 18 mm Screw hole spacing: 20 mm - 42 mm Scope of supply: 2x universal adapter black anodized (L 59,6 x W 18 mm) 2x flat head screw M6 hexagon socket (for mounting the handles) 4x M6 x 10 mm hexagon socket screw stainless steel 4x M6 x 15 mm hexagon socket screw stainless steel 4x M6 x 20 mm hexagon socket screwScrew stainless steel 4x M6 x 25 mm hexagon socket screw stainless steel 4x M6 x 30 mm hexagon socket screw stainless steel 4x M6 self-locking nut 4x washer, Diameter: 11.8 x 6 x 1.4 mm 4x bush, diameter: 9.8 x 6 x 1 mm 4x bush, diameter: 11 x 6 x 9.7 mm 4x bush, diameter 10.5 x 6 x 7 mm 693 208 165 105 40
Highsider Mirror Stealth -X2 With LED Indicator (Pair) 301-451
Highsider mirror Stealth-X2 LED indicator, black, E-approved The characteristic stealth design known from military stealth technology distinguishes the shapely and high-qualityworked mirrors.Combined with the colour matt black, the mirror head made of high-quality plastic with its angular elements has a striking appearance.Thanks to the uselight materials, the STEALTH series from Highsider belongs to the flyweight weight class.An adjustable joint provides additional adjustment possibilities for the STEALTH -X2.Dimensions: Width head A: 119 mm Height head B: 90 mm Total width C: 175 mmTotal height D: 170 mmLength of stem : 144 mm up to the bend, from the bend 44 mm up to the joint, then again 40mm to the threaded bolt. Back hole: M8 x 1.25 mm Adapter: M10 x 1.25 mm 5120 692 324 229 69 Handlebar Black Boulon(s) E-Mark Oui Aluminium 90.0 119.0 par paire Gauche + Droite Rhomboid M10 x 1.25 Left + Right
Highsider Action Mirror - Aluminium (1pc) 301-440
CNC-milled Alu-mirror ACTION, rectangular head, chrome plated or black, adjustable stem, incl. one extra adapter M 10 with L/Hand thread.Not for use in road traffic! Only for show and racing purposes! no ABE!Including extra adapter M10 x 1.25 mm with left hand thread for Yamaha. Can be used for left and right side.Dimensions:Width, head: 120 mmHeight, head: 48 mmLength, arm to joint: 140 mmLength, arm to threaded bolt: 170 mmScope of delivery: 1 pieceNote: without E-Test Mark Black 3032 243 227 167 80 Handlebar Black Adaptateur de filetage Not homologated & Not street legal Non Aluminium 48.0 120.0 à l'unité Gauche + Droite Rectangle M10 x 1.25 Left + Right
Highsider Mirror Adapter M10 To M8, SW 17 mm, Chrome 304-056
This mirror adapter expands your options when choosing a mirror from our range of accessories for your bike.The threaded bolt has an M10 thread for screwing onto your motorbike.Suitable for right and left side, for all mirrors that have an M8 internal thread in the stem.Mirror adapter M10 x 1.5 right-hand thread to M8 x 1.25 right-hand thread - various BMW modelsWidth across flats lock nut: 17 mmScope of delivery: 1 piece Chrome 77 28 61 60 21
Highsider Quadro Bundle License Plate Holder 280-15300
Model-specific license plate holder from Highsider with license plate light and reflectorCustom-made for your bikeHigh-quality processed license plate holder made of black, powder-coated steel - weather-resistant andlong-lasting.Thanks to a continuously adjustable inclination angle, the holder has an excellent fit.No need to change any fairing parts.The license plate holder is perfectly tailored to your bike and ensures with a maximum of quality and functionality that you can easily design your bike according to your wishescan.Details:Black powder-coatedThe license plate holder is suitable for every type of license plate (width 175 mm)No fairing parts have to be changedAngle of inclination is individually adjustableVery good fit, sporty lookTurn signal holders are continuously adjustableTurn signal holder with 10.5 mm bore for the turn signalsLicense plate light and reflector are E-approvedThe carrier is not subject to registrationScope of delivery:License plate holderTurn signal holderFastening screwsT-bracket for reflectors Licence plate light ReflectorsTip:Clamp the licence plate instead of drilling with the universal licence plate frame: 1108352If you do not havemodel-specific license plate holders for your vehicle, our universal license plate holders in 8 different types are certainly a good alternative.Technical details of the Fixings:KZH bracket: 2 x M6 screws, 2 x lock nut, 1 x locking screwTurn signal bracket: 2 x M4 pan-head screws, 1 x self-locking nut 20580 1366 497 348 119 Black Steel
Highsider Columbia 2 Mirror (Pair) 301-056
Highsider Columbia 2 handlebar mirror Adjustable mirror arm in matt black anodised aluminium with adjustable handle and convex glass. Thanks to the use of a second joint on the handle, there are additional adjustment possibilities for your safety. Includes extra adapter M10 x 1.25 mm with left-hand thread for Yamaha, E-approved.Dimensions:Width, head: 150 mmHeight, head: 90 mmLength, arm to center joint: 120 mmScope of supply: 1 pair including extra adapter M10 x 1.25 mm with left-hand thread for Yamaha. 4358 670 227 320 60 Handlebar Black Adaptateur de filetage E-Mark Non Aluminium 90.0 150.0 par paire Gauche + Droite Triangular M10 x 1.25 Left + Right
Highsider Quadro Bundle License Plate Holder 280-35100
Model-specific license plate holder from Highsider with license plate light and reflectorCustom-made for your bikeHigh-quality processed license plate holder made of black, powder-coated steel - weather-resistant andlong-lasting.Thanks to a continuously adjustable inclination angle, the holder has an excellent fit.No need to change any fairing parts.The license plate holder is perfectly tailored to your bike and ensures with a maximum of quality and functionality that you can easily design your bike according to your wishescan.Details:Black powder-coatedThe license plate holder is suitable for every type of license plate (width 175 mm)No fairing parts have to be changedAngle of inclination is individually adjustableVery good fit, sporty lookTurn signal holders are continuously adjustableTurn signal holder with 10.5 mm bore for the turn signalsLicense plate light and reflector are E-approvedThe carrier is not subject to registrationScope of delivery:License plate holderTurn signal holderFastening screwsT-bracket for reflectors Licence plate light ReflectorsTip:Clamp the licence plate instead of drilling with the universal licence plate frame: 1108352If you do not havemodel-specific license plate holders for your vehicle, our universal license plate holders in 8 different types are certainly a good alternative.Technical details of the Fixings:KZH bracket: 2 x M6 screws, 2 x lock nut, 1 x locking screwTurn signal bracket: 2 x M4 pan-head screws, 1 x self-locking nut 5560 858 350 248 64 Black Steel
Highsider Mirror Iron Cross (Pair) 301-110
Highsider Iron Cross Mirror for Harley-Davidson modelsCross design mirror including extra adapter for Harley Davidson and for Yamaha, E-approved.A question of retro or modern point of view. The Highsider mirror series are distinguished by their characteristic design and aerodynamic function.Dimensions:Width: 110 mmHeight: 110 mmDepth: 20 mmHandle, length: 170 mmDelivery scope: 1 pair including 2x Harley-Davidson adapter, 2x M10 adapter with right-hand thread and 1x M10 adapter with left-hand thread. Black 5130 908 334 226 68 Handlebar Black Adaptateur de filetage E-Mark Non Aluminium 110.0 110.0 par paire Gauche + Droite Cross M10 x 1.25 Left + Right
Highsider Handlebar End Mirror Iron Cross (1pc) 301-112
Highsider handlebar end mirror in cross design with an aluminium head. Suitable for handlebars with an inner diameter of 12 to 21 mm. Can be used for left and right side, E-approved.The Highsider mirror series are characterized by characteristic design and aerodynamic function. This is how you keep the overview.Dimensions:Width: 110 mmHeight: 110 mmDepth: 20 mmLength, arm to joint: 70 mm Length, arm to clamp: 115 mmWidth,Clamp: 12 mmScope of delivery: 1 pc. incl. reducing rings for 1" and 7/8"Note:To close any holes for fixing the original handlebar mirrors, use the Highsider Caps: Articles 1108553001 Black 2970 430 225 165 80 Handlebar Black Serrage sur guidon E-Mark Non Aluminium 110.0 110.0 à l'unité Gauche + Droite Cross
Highsider Akron-RS Pro License Plate Holder 280-301HP
Highsider AKRON-RS PRO licence plate holder incl. licence plate light The Highsider AKRON-RS PRO licence plate holder adapts perfectly to the lines of your bike thanks to its design. The model-specific holder of the Highsider AKRON-RS PRO enables mounting on the original mounting points of your bike and thus replacement without further drilling or cutting. To prevent damage to cables, all sharp-edged penetrations are protected by a rubber membrane. The licence plate is made of sheet steel and is 2 mm thick. It is precisely cut to size using a laser. After edging, it is given a weather-resistant black powder coating. This ensures an optimum fit and a long service life. The infinitely variable adjustment option allows you to position the plate as required without drilling. To hold the plate in this position, there is an additional locking screw. The indicator brackets of the Highsider AKRON-RS PRO are adjustable in width and therefore suitable for all types of accessory indicators. This adjustment option allows you to adapt the position of your indicators to a wide variety of licence plates. To enable the indicators to be fitted without disconnecting them from the wiring harness, the 8 mm holes are slotted to the side. You can also individually adjust the position of the rear indicator using a slider. Adaptation to the different designs of EU licence plates is therefore no problem. To securely screw the licence plate and reduce vibrations, two rubber washers are included in the scope of delivery. A further rubber buffer supports the licence plate on its underside. This PRO version of the Highsider AKRON-RS includes the very small, high-quality aluminium Highsider licence plate light with mounting plate and support arm. The bracket is adjustable in height and designed so that it can be mounted in the legally prescribed position. Details: • model-specific bracket • infinitely adjustable indicator holder • slotted indicator holder for easy installation without cable separation • infinitely adjustable reflector, E-approved • suitable for European licence plates • infinitely adjustable angle of inclination • additional screw for optimum positional security • simple fixing without further work steps (e.g. drilling) • easy to install without cable separation e.g. drilling) • simple installation of the licence plate using a slotted bracket • licence plate light incl. holder included in the scope of delivery . bracket included • licence plate light, E-marked • infinitely adjustable licence plate light • many different options for mounting the licence plate light The scope of delivery of the Highsider AKRON-RS PRO includes: • Model-specific bracket with mounting parts • Highsider AKRON-RS licence plate mounting plate • Adjustable indicator brackets • E-marked reflector with adjustable bracket • E-marked licence plate light • Fitting instructions Notes: • If side reflectors are fitted to your original licence plate holder, these must be refitted in a suitable position or replaced with new ones. • Special indicator holders are optionally available for the original indicators. Tip: If you have not found a model-specific licence plate holder for your vehicle, then you will certainly find what you are looking for in the universal licence plate holders from Highsider, which are available in many different versions. 16128 1638 320 360 140 Black Steel
Highsider Handlebar Weights EVO 161-033
Highsider EVO bar ends, chrome plated or black.Chrome plated or black handlebar ends, suitable for handlebars with an inner diameter of 12 to 22mm – i.e. for most 7/8 inch and 1 inch aluminum or steel handlebars. All our handlebar end mirrors (hanging mirrors) with a diameter of 1 inch (25.4 mm) can be attached to the Bar End Weights.Tailor-made for your bike – the extensive range of accessories from Highsider is perfectly tailored to your bike. With a maximum of quality andfunctionality you can easily design your bike according to your wishes.Dimensions:diameter: 35,5 mmlength: 28 mmSpecifications:Material: AluminiumPlease check the dimensions for accuracy of fit before purchase!Scope of delivery:1 set, including mounting set and Universal clamping system:2 x Bar End Weights.2 x clamping sleeves D. 12 mm and D. 16 mm.2 x centering sleeves type 1, type 2, type 3.2 x central screw M6, toothed lock washer andCone nut M6.Note:Replacement mounting set: 1107882 (161-034) Black 672 153 160 105 40 Black 25,4 Aluminium by pair
Highsider Wave Handlebar Weights 161-0724
Highsider Wave Bar End Universal fit for handlebars with inner diameters from 12 to 22 mm – therefore for most 7/8" and 1" aluminium or steel handlebars. All hanging handlebar end mirrors from Highsider and SHIN YO with external clamp can be attached to the Bar End Weights.Dimensions:Bar End Weights: Ø 34.5 mmWidth: 18 mmMirror mount: Ø = 29.80 mmMirror mount: Width = 12 mmPlease check the dimensions for fit before buying!Scope of supply: 1 pair, contains:Each 2 x Bar End WeightsEach 2 x clamping sleeve Ø 12 and 16 mmEach 2 spacer sleeves with Ø 14 , 18 and 21 mm2 x M6 central screw2 x M6 cone nutNote:The Bar End Weights can also be used without using a handlebar end mirror and can be adapted to the look of your bike by one of the 4 different color rings. Gold 672 140 160 105 40 Gold 34,5 Aluminium by pair
Highsider Wave Handlebar Weights 161-0722
Highsider Wave Bar End Universal fit for handlebars with inner diameters from 12 to 22 mm – therefore for most 7/8" and 1" aluminium or steel handlebars. All hanging handlebar end mirrors from Highsider and SHIN YO with external clamp can be attached to the Bar End Weights.Dimensions:Bar End Weights: Ø 34.5 mmWidth: 18 mmMirror mount: Ø = 29.80 mmMirror mount: Width = 12 mmPlease check the dimensions for fit before buying!Scope of supply: 1 pair, contains:Each 2 x Bar End WeightsEach 2 x clamping sleeve Ø 12 and 16 mmEach 2 spacer sleeves with Ø 14 , 18 and 21 mm2 x M6 central screw2 x M6 cone nutNote:The Bar End Weights can also be used without using a handlebar end mirror and can be adapted to the look of your bike by one of the 4 different color rings. Red 672 140 160 105 40 Red 34,5 Aluminium by pair
Highsider Wave Handlebar Weights 161-0721
Highsider Wave Bar End Universal fit for handlebars with inner diameters from 12 to 22 mm – therefore for most 7/8" and 1" aluminium or steel handlebars. All hanging handlebar end mirrors from Highsider and SHIN YO with external clamp can be attached to the Bar End Weights.Dimensions:Bar End Weights: Ø 34.5 mmWidth: 18 mmMirror mount: Ø = 29.80 mmMirror mount: Width = 12 mmPlease check the dimensions for fit before buying!Scope of supply: 1 pair, contains:Each 2 x Bar End WeightsEach 2 x clamping sleeve Ø 12 and 16 mmEach 2 spacer sleeves with Ø 14 , 18 and 21 mm2 x M6 central screw2 x M6 cone nutNote:The Bar End Weights can also be used without using a handlebar end mirror and can be adapted to the look of your bike by one of the 4 different color rings. Silver 567 188 135 105 40 Silver 34,5 Aluminium by pair
Highsider Wave Handlebar Weights 161-0720
Highsider Wave Bar End Universal fit for handlebars with inner diameters from 12 to 22 mm – therefore for most 7/8" and 1" aluminium or steel handlebars. All hanging handlebar end mirrors from Highsider and SHIN YO with external clamp can be attached to the Bar End Weights.Dimensions:Bar End Weights: Ø 34.5 mmWidth: 18 mmMirror mount: Ø = 29.80 mmMirror mount: Width = 12 mmPlease check the dimensions for fit before buying!Scope of supply: 1 pair, contains:Each 2 x Bar End WeightsEach 2 x clamping sleeve Ø 12 and 16 mmEach 2 spacer sleeves with Ø 14 , 18 and 21 mm2 x M6 central screw2 x M6 cone nutNote:The Bar End Weights can also be used without using a handlebar end mirror and can be adapted to the look of your bike by one of the 4 different color rings. Black 690 168 148 106 44 Black 34,5 Aluminium by pair
Highsider Enterprise Handlebar Weights 161-0901
Highsider Enterprise-EP1 Bar End WeightsUniversal fit for all handlebars with an inner diameter of 12 to 22 mm – therefore for most 7/8" and 1" aluminium or steel handlebars. The perfect mount for all hanging handlebar end mirrors of the brand Highsider and SHIN YO with external clamp. Of course, the Bar End Weights can also be used without the use of a handlebar end mirror and can be adapted to the look of your bike, for example, by using one of the optionally available colour rings.Dimensions:Bar End WeightsDiameter: 34,5 mmWidth: 14,5 mmMount for mirrorDiameter: 29,8 mmWidth: 12 mmScope of delivery:2 x Bar End Weights2 clamping sleeves with 12 and 16 mm Ø2 spacer sleeves with 14,18 and 21 mm Ø2 x M6 central screw2 x M6 cone nutOptional orderable:Color ring for Bar End Weights (1108564)Note:Please check the dimensions for accuracy of fit before buying. Silver 567 182 135 105 40 Silver 34,5 Aluminium by pair
Highsider Enterprise Handlebar Weights 161-0900
Highsider Enterprise-EP1 Bar End WeightsUniversal fit for all handlebars with an inner diameter of 12 to 22 mm – therefore for most 7/8" and 1" aluminium or steel handlebars. The perfect mount for all hanging handlebar end mirrors of the brand Highsider and SHIN YO with external clamp. Of course, the Bar End Weights can also be used without the use of a handlebar end mirror and can be adapted to the look of your bike, for example, by using one of the optionally available colour rings.Dimensions:Bar End WeightsDiameter: 34,5 mmWidth: 14,5 mmMount for mirrorDiameter: 29,8 mmWidth: 12 mmScope of delivery:2 x Bar End Weights2 clamping sleeves with 12 and 16 mm Ø2 spacer sleeves with 14,18 and 21 mm Ø2 x M6 central screw2 x M6 cone nutOptional orderable:Color ring for Bar End Weights (1108564)Note:Please check the dimensions for accuracy of fit before buying. Black 672 132 160 40 105 Black 34,5 Aluminium by pair
Highsider Enduro Handguards With LED illuminant 320-100
Highsider hand protectors with LED daytime running light and parking lightThe ingenious accessory for all Enduro riders - hand protectors with integrated daytime running light (TFL) and parking light function. 11 High Power LEDs ensure perfect recognizability in road traffic and a spectacular optical appearance. The TFL switches to dimmed parking light mode when switching to low beam. Due to the high-quality aluminium mounting the protectors get a high stability, E-examined.Fits most handlebars with an inner diameter of approx. 13 mm to 20 mm and an outer diameter of approx. 21 mm to 26 mm.ConnectionsBlack cable = ground (-)Connect red cable = plus (+) to switched plus of ignitionConnect white cable = control cable to parking light (+)Power consumptionParking light mode: approx. 12V / 0.06A / 0.73WDaytime running light: approx. 12V / 0.32A / 3.84W 7762 1800 345 250 90 Black Translucent E-Mark LED Aluminium by pair Front